Lexus NX 200 - If the Electronic Key Does Not Oper- Ate Properly

457
7
LEXUSNX300/NX200OwnersManualGeneralM78540en
7-2. Steps to take in an emergency
When trouble arises
■ Things to check before taking measures
● Make sure that the smart entry & start
system has not been deactivated in the
customization setting. If it is off, turn the
function on.
(Customizable features: P.482)
● Check if battery-saving mode is set. If it is
set, cancel the function. (P.128)
Use the mechanical key (P.108) to
perform the following operations.
■ Unlocking the door
1 Insert the mechanical key while
pulling on the driver’s door handle.
2 Turn the key in order to perform the
following operations.
Unlocking the door
Opens the windows and moon
roof
*
(turn and hold)
Closes the windows and moon
roof
*
(turn and hold)
*
: These settings must be customized at
your Lexus dealer
3 Remove the key, return the handle,
and then pull the handle again.
If the electronic key does not
operate properly
If communication between the
electronic key and vehicle is inter-
rupted (P.129) or the electronic
key cannot be used because the
battery is depleted, the smart entry
& start system and wireless remote
control cannot be used. In such
cases, the doors can be opened and
the engine can be started by follow-
ing the procedure below.
NOTICE
■ In case of a smart entry & start system
malfunction or other key related
problems
Take your vehicle with all the electronic
keys provided with your vehicle, includ-
ing the card key, to your Lexus dealer.
Locking and unlocking the doors
A
B
C