Lexus NX 200 - Page 80

79
1
LEXUSNX300/NX200OwnersManualGeneralM78540en
1-3. Theft deterrent system
For safety and security
vehicle.
1 Turn the engine switch off.
2 Press the intrusion sensor and tilt
sensor cancel switch.
A message will be shown on the multi-
information display in the instrument clus-
ter.
The intrusion sensor and tilt sensor will
revert to on each time the engine switch is
turned to IGNITION ON mode.
■ Canceling and automatic re-enabling of
the intrusion sensor and tilt sensor
● The alarm will still be set even when the
intrusion sensor and tilt sensor are can-
celed.
● After the intrusion sensor and tilt sensor
are canceled, pressing the engine switch
or unlocking the doors using the entry
function (if equipped) or wireless remote
control will re-enable the intrusion sensor
and tilt sensor.
● The intrusion sensor and tilt sensor will
automatically be re-enabled when the
alarm system is reactivated.
■ Intrusion sensor detection consider-
ations
The sensor may trigger the alarm in the fol-
lowing situations:
● People or pets are in the vehicle.
● A window or the moon roof (if equipped)
is open.
In this case, the sensor may detect the fol-
lowing:
• Wind or the movement of objects such as
leaves and insects inside the vehicle
• Ultrasonic waves emitted from devices
such as the intrusion sensors of other
vehicles
• The movement of people outside the
vehicle
● Unstable items, such as dangling acces-
sories or clothes hanging on the coat
hooks, are in the vehicle.
● The vehicle is parked in a place where
extreme vibrations or noises occur, such
as in a parking garage.