Lexus NX 200 - Page 97

96
LEXUSNX300/NX200OwnersManualGeneralM78540en
2-1. Instrument cluster
*
: Vehicles with Stop & Start system
 Accent color
Select to change the accent colors on the
screen, such as the cursor color.
 Initialization
Select to reset the meter display settings.
■ Suspension of the settings display
In the following situations, operation of the
settings display will be temporarily sus-
pended.
● When a warning message appears on the
multi-information display
● When the vehicle begins to move
■ Tire inflation pressure (vehicles with the
tire inflation pressure display function)
● It may take a few minutes to display the
tire inflation pressure after the engine
switch is turned to IGNITION ON mode.
It may also take a few minutes to display
the tire inflation pressure after inflation
pressure has been adjusted.
● “---” may be displayed if the tire informa-
tion cannot be determined due to unfa-
vorable radio wave conditions.
● Tire inflation pressure changes with tem-
perature. The displayed values may also
be different from the values measured
using a tire pressure gauge.
Automatically displayed when the sys-
tem is used. (P.278)
WARNING
■ Cautions during setting up the dis-
play
As the engine needs to be running
during setting up the display, ensure that
the vehicle is parked in a place with ade-
quate ventilation. In a closed area such as
a garage, exhaust gases including harm-
ful carbon monoxide (CO) may collect
and enter the vehicle. This may lead to
death or a serious health hazard.
NOTICE
■ During setting up the display
To prevent battery discharge, ensure that
the engine is running while setting up the
display features.
Lexus parking assist-sensor (if
equipped)