To Next PageTo Next Page
Need help?Do you have a question about the Lexus RC 350 2015 and is the answer not in the manual?
General| Brand | Lexus |
|---|---|
| Model | RC 350 2015 |
| Category | Automobile |
| Language | English |
Check engine oil level using the dipstick and inspect for dirt or impurities.
Visually check brake fluid level in the reservoir and replenish if low.
Check electrolyte level, battery voltage, and terminal connection for proper charge and security.
Visually check coolant level in the reservoir when the engine is cool.
Inspect the functions of the wireless remote: lock doors, unlock doors, open trunk, and sound alarm.
Test smart access functionality for locking and unlocking doors using the electronic key.
Walk around the vehicle and check that all exterior lights illuminate correctly.
Check operation of turn signals, headlights, high beams, fog lights, and emergency flashers.
Check seat belt operation, including extension, retraction, twisting, and buckle function.
Check power window and power door lock operation, including lock-out features.
Check that all warning and indicator lights operate properly and illuminate briefly.
Check smooth operation of all air conditioning and heater controls and modes.
Check seat belt operation, including extension, retraction, and buckle function.
Check that the rear seat backs can be folded down.
Check trunk unlocking, luggage compartment light, and tamper-proofing.
Check that spare tire, tools, jack, and jack handle are properly installed.
Check and adjust spare tire air pressure.
Check seat belt operation, including extension, retraction, and buckle function.
Check that the rear seat head restraint operates smoothly.
Check power window and door lock operation, including accessory mode function.
Check power seat adjustment operation, including position, angle, height, and lumbar support.
Check front license plate and mounting bracket installation. Reference Service Bulletin.
Check chassis components for proper installation, clamping, connections, and damage.
Visually check various areas for fluid leaks such as engine, brake lines, and transmission.
Check engine starting, shift lever operation, and transmission up/down shifts.
Check engine performance, smoothness, and gauge operations under various conditions.
Check cruise control functions: ON-OFF, SET, RES, CANCEL, and preset speed cancellation.
Attach printouts to PDS check sheet and file with repair order. Submit product technical reports.
