157
3-3. Adjusting the seats
3
Operation of each component
RC350_RC300_RC200t_RC F_U (OM24671U)
■ When adjusting the seat position
● Take care when adjusting the seat position to ensure that other passengers are not
injured by the moving seat.
● Do not put your hands under the seat or near the moving parts to avoid injury.
Fingers or hands may become jammed in the seat mechanism.
● Make sure to leave enough space around the feet so they do not get stuck.
■ Seat adjustment
To reduce the risk of sliding under the lap belt during a collision, do not recline the seat
more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces
directly to the abdomen, or your neck may contact the shoulder belt, increasing the risk
of death or serious injury in the event of an accident.
Adjustments should not be made while driving as the seat may unexpectedly move and
cause the driver to lose control of the vehicle.
■ Lever-operated “Front, Fold & Return” seat
● Before operating the lever-operated “Front, Fold & Return” seat, ensure that any sur-
rounding passengers or objects will not contact the seat.
● Make sure the seatback is locked securely before driving.
● Never operate the lever-operated “Front, Fold & Return” seat while the vehicle is
moving.
■ Jam protection function
Do not use a hand, foot, or any other part of your body to intentionally activate the jam
protection function.
To Next Page
Loading...
Need help?
General
