EasyManuals Logo

Lexus RC200t User Manual

Lexus RC200t
700 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #309 background imageLoading...
Page #309 background image
309
4-5. Using the driving support systems
4
Driving
RC350_RC300_RC200t_RC F_U (OM24671U)
Conditions under which the BSM function may not function correctly
The BSM function may not detect vehicles correctly in the following situations:
When the sensor is misaligned due to a strong impact to the sensor or its surround-
ing area
When mud, snow, ice, a sticker, etc. is covering the sensor or surrounding area on
the rear bumper
When driving on a road surface that is wet with standing water during bad weather,
such as heavy rain, snow, or fog
When multiple vehicles are approaching with only a small gap between each vehicle
When the distance between your vehicle and a following vehicle is short
When there is a significant difference in speed between your vehicle and the vehicle
that enters the detection area
When the difference in speed between your vehicle and another vehicle is changing
When a vehicle enters a detection area traveling at about the same speed as your
vehicle
As your vehicle starts from a stop, a vehicle remains in the detection area
When driving up and down consecutive steep inclines, such as hills, dips in the road,
etc.
When driving on roads with sharp bends, consecutive curves, or uneven surfaces
When vehicle lanes are wide, or when driving on the edge of a lane, and the vehicle
in an adjacent lane is far away from your vehicle
When a bicycle carrier or other accessory is installed to the rear of the vehicle
When there is a significant difference in height between your vehicle and the vehicle
that enters the detection area
Immediately after the BSM main switch is turned on
Instances of the BSM function unnecessarily detecting a vehicle and/or object may
increase in the following situations:
When the sensor is misaligned due to a strong impact to the sensor or its surround-
ing area
When the distance between your vehicle and a guardrail, wall, etc. that enters the
detection area is short
When driving up and down consecutive steep inclines, such as hills, dips in the road,
etc.
When vehicle lanes are narrow, or when driving on the edge of a lane, and a vehicle
traveling in a lane other than the adjacent lanes enters the detection area
When driving on roads with sharp bends, consecutive curves, or uneven surfaces
When the tires are slipping or spinning
When the distance between your vehicle and a following vehicle is short
When a bicycle carrier or other accessory is installed to the rear of the vehicle

Table of Contents

Other manuals for Lexus RC200t

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexus RC200t and is the answer not in the manual?

Lexus RC200t Specifications

General IconGeneral
BrandLexus
ModelRC200t
CategoryAutomobile
LanguageEnglish

Related product manuals