338
5-2. Setup
RC350_RC300_RC200t_RC F_U (OM24671U)
Go to “Customize Images”: “Setup” “General” “Customize
Images”
Select “Set Images” and then select the desired image.
Set as startup image.
Set as screen off image.
Set as startup image and screen
off image.
■ Adding an image
Connect a USB memory device. (P. 33 4)
Select “Copy from USB” on the “Customize Images” screen and then
select the desired image.
Move the controller to the left and then select “Copy”.
Up to 10 images can be downloaded.
■ Deleting images
Select “Delete Images” on the “Customize Images” screen and then select the
desired images.
■ USB memory
When saving the images to a USB memory device, name the folder that the images are
saved to “Image”.
● Compatible device formats
The following device format can be used:
• USB communication format: USB2.0 HS (480 Mbps) and FS (12 Mbps)
• File system format: FAT16/32 (Windows)
• Correspondence class: Mass storage class
The following types of files can be used:
• The image’s file format must be JPEG.
• The file name may only contain ASCII characters.
● JPEG file compatibility
Compatible image size: Maximum 5 MB
Customizing images
1
2
1
2
3
1
2
3
To Next Page
Loading...
Need help?
General
