125
2. Instrument cluster
2
Instrument cluster
● Switching the display
To switch to advanced display, press .
To return to normal display, press .
● Resetting the record of maximum G-forces
With the record of maximum G-forces displayed, press and hold to
reset the display.
● Peak hold function (advanced display only)
If lateral G-forces of 0.5 G or
greater are generated, the G-
force value displayed on the main
meter will turn yellow and be held
for 3 seconds.
■ Tire pressure
Displays the tire inflation pressure (→P. 518)
Unlike the tire pressure display on the drive information menu, the tire inflation
pressure display of the “F” content menu can be displayed while lap time is being
measured.
■ Rear wing position
Displays the raised/retracted state of the active rear wing
To Next Page
Loading...
Need help?
General
