Lexus RC200t User Manual

390
5-7. Connecting Bluetooth
®
When you register a phone, auto connection will be activated. It is recom-
mended to have the system set to this mode and leave the Bluetooth
®
phone in a
place where a good connection can be established.
When the engine switch is turned to ACCESSORY or IGNITION ON mode,
the system will search for a nearby cellular phone you have registered.
Next, the system automatically connects with the most recent phone that was
connected. The connected result is displayed.
When automatic connection priority is set to on and there is more than one reg-
istered Bluetooth
®
phone available, the system will automatically connect to the
Bluetooth
®
phone with the highest priority. (→P. 392)
When auto connection has failed or “Bluetooth
*
1
Power” is turned off, you must
connect the Bluetooth
®
device manually.
Go to “Bluetooth
*
1
Setup”: “MENU” button → “Setup” → “Bluetooth*
1
”
Select the device to connect.
Select “Connect XX
*
2
”, “Connect as a Phone” or “Connect as an Audio
Player”.
If the desired Bluetooth
®
device is not displayed, register the device.
(→P. 387)
*
1
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
*
2
: XX represents the selected device name.
■ Reconnecting a Bluetooth
®
phone
If the system cannot connect due to poor signal strength with the engine switch in
ACCESSORY or IGNITION ON mode, the system will automatically attempt to recon-
nect.
■ Connecting a phone while Bluetooth
®
audio is playing
● Bluetooth
®
audio will stop temporarily.
● It may take time to connect.
Connecting a Bluetooth
®
phone
There are two connecting methods available: automatic and manual.
Auto connection
Manual connection
1
2
3

Lexus RC200t Specifications

General

Brand	Lexus
Model	RC200t
Category	Automobile
Language	English