231
4-3. Operating the lights and wipers
4
Driving
■ Notes when using the Automatic High Beam system
Observe the following to ensure that the Automatic High Beam functions correctly.
● Do not place items on the dashboard. There is a possibility that the camera sensor will
mistake items reflected in the windshield for streetlights, the headlights of other vehi-
cles, etc.
● Do not install a parking tag or any other accessories near or around the camera sen-
sor.
● Do not overload the vehicle.
● Do not modify the vehicle.
● If the windshield needs to be replaced, contact your Lexus dealer.
● Do not touch the camera sensor.
● Do not subject the camera sensor to a strong
impact.
● Do not disassemble the camera sensor.
● Do not spill liquid onto the camera sensor.
● Do not apply window tinting or stickers to the
camera sensor or the area of windshield near
the camera sensor.
To Next Page
Loading...
Need help?
General
