560
8-2. Steps to take in an emergency
Insert the towing eyelet into the hole
and tighten partially by hand.
Tighten down the towing eyelet
securely using a wheel nut wrench
or hard metal bar.
Securely attach cables or chains to the towing eyelet.
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the engine.
If the engine does not start, turn the engine switch to IGNITION ON mode.
Shift the shift lever to N and release the parking brake.
When the shift lever cannot be shifted: →P. 218
■ While towing
If the engine is not running, the power assist for the brakes and steering will not function,
making steering and braking more difficult.
■ Wheel nut wrench
Wheel nut wrench is installed in trunk. (→P. 593, 608)
To Next Page
Loading...
