613
8-2. Steps to take in an emergency
8
When trouble arises
Attach the 2 stickers as shown.
Remove any dirt and moisture from the
wheel before attaching the label. If it is
impossible to attach the label, make sure
to tell your Lexus dealer when you have
them repair and replace the tire that
sealant is injected.
Check the specified tire inflation
pressure.
Tire inflation pressure is specified on the
label as shown. (→P. 652)
Start the engine. (→P. 207)
To inject the sealant and inflate the
tire, turn the compressor switch on.
To Next Page
Loading...
Need help?
General
