68
1-1. For safe use
While pushing the child restraint
system into the rear seat, allow
the shoulder belt to retract until
the child restraint system is
securely in place.
After the shoulder belt has retracted
to a point where there is no slack in
the belt, pull the belt to check that it
cannot be extended.
If the child restraint has a top tether strap, follow the child restraint manu-
facturer’s operation manual regarding the installation, using the top tether
strap to latch onto the top tether strap anchor. (→P. 76)
After installing the child restraint system, rock it back and forth to ensure
that it is installed securely.
■ Booster seat
High back type on RC350/
RC300/RC200t: Remove the
head restraint if it interferes with
your child restraint system.
(→P. 173)
Place the child restraint system on the seat facing the front of the vehicle.
Booster type High back type
To Next Page
Loading...
