Lexus RC350 - Page 57

57
2-2. Connectivity settings
2
Basic function
1 Select “Access Point Name”.
2 Enter the desired access point
name (SSID) and select “OK”.
1 Select “Channel”.
2 Check that the following screen is
displayed.
Select to change the channel selec-
tion to automatic/manual.
When “Manual” is selected, select
to change the channel.
1 Set “Select Channel” to “Manual”.
2 Select “Channel Number”.
3 Enter the desired channel number
and select “OK”.
 Channels 1 through 11 can be
selected.
● If a connected device is taken out of the
Wi-Fi
®
connection area, the connection
will be severed.
● If the vehicle is driven out of the cellular
communication coverage area, connect-
ing to the internet via the Wi-Fi
®
Hotspot
will not be possible.
● If a Bluetooth
®
device is used while a
device is connected using the Wi-Fi
®
Hotspot function, the communication
speed may decrease.
● Depending on the environment in which
the access point is used, the communica-
tion speed may be low or communication
may not be possible.
Changing the access point name
(SSID)
Selecting a Wi-Fi
®
connection
channel
Changing the channel
A
B
Wi-Fi
®
function operating hints
WARNING
● Use Wi-Fi
®
devices only when safe
and legal to do so.
● Your audio unit is fitted with Wi-Fi
®
antennas. People with implantable car-
diac pacemakers, cardiac resynchro-
nization therapy-pacemakers or
implantable cardioverter defibrillators
should maintain a reasonable distance
between themselves and the Wi-Fi
®
antennas.
The radio waves may affect the opera-
tion of such devices.
● Before using Wi-Fi
®
devices, users of
any electrical medical device other
than implantable cardiac pacemakers,
cardiac resynchronization ther-
apy-pacemakers or implantable car-
dioverter defibrillators should consult
the manufacturer of the device for
information about its operation under
the influence of radio waves.
Radio waves could have unexpected
effects on the operation of such medi-
cal devices.