Lexus RC350 - Page 90

90
3-1. Basic operation
received, it may take longer than normal
for the information to be displayed on the
screen.
● If traffic information cannot be received
because the vehicle is outside of HD
Radio coverage area, it may still be able
to be received using DCM. (P.198)
A list of current traffic information can
be displayed along with information on
the location of each incident.
1 Display the traffic incidents screen:
 “MENU” button  “Info” 
“Traffic Incidents”
2 Select “Traffic Events on Current
Road”, “Traffic Events on Current
Route” or “Traffic Events Nearby”.
3 Select the desired traffic informa-
tion.
 When “Traffic Events Nearby” is
selected, depending on whether the
traffic flow information is
enabled/disabled, the following will
be displayed:
When enabled: Traffic event and conges-
tion information
When disabled: Traffic event information
only
4 Check that the traffic information is
displayed.
“Detail”: Select to display detailed traffic
information.
A map with predictive traffic data can
be displayed.
1 Display the traffic incidents screen:
 “MENU” button  “Info” 
“Traffic Incidents”
2 Select “Predictive Traffic Map”.
3 Scroll the map to the desired point
(P.84) and set the time of predic-
tive traffic information.
 The time of the predictive traffic
information can be changed in
15-minute intervals up to +45 min-
utes.
“+”: Moves the time forward 15 minutes.
“-”: Moves the time back 15 minutes.
Displaying traffic information
Displaying predictive traffic
information