ENGINE
248
CHECKING THE ENGINE OIL
LEVEL
62R001c
With the engine at operating temperature and turned off, check
the oil level on the dipstick.
1. To get a true reading, the vehicle should be on a level spot. After
turning off the engine, wait a few minutes for the oil to drain back
into the bottom of the engine.
2. Pull out the dipstick, and wipe it clean with a rag.
3. Reinsert the dipstick and push it in as far as it will go, or the
reading will not be correct.
62G002â2
î
1
Add oil
2
O.K.
3
Too full
4. Pull the dipstick out and look at the oil level on the end. If it is
between the full line (
5
) and the low line (
4
), it is O.K.
To Next Page
Loading...
