SWITCHES
28
POWER WINDOW SWITCHES
12R011d
1
For driver’s window
2
For front passenger’s window
3
For left rear window
4
For right rear window
To raise or lower the windows, use the switch on each door. The
passengers’ windows can also be controlled by the switches on
the driver’s door.
The ignition key must be in the ”ON” position. However, even if the
ignition key is turned to the ”ACC” or ”LOCK” position with all the
doors closed, the window can be operated until a front door is opened
(or for about 45 seconds).
12L010
Operating the switches
To raise or lower the window, pull the switch halfway up or push
it halfway down.
Automatic operation: To fully raise or lower the window
automatically, pull the switch fully up or push it fully down.
To stop the window partway, lightly push or pull the switch in the
opposite direction and then release it.