COMFORT ADJUSTMENT
141
16sa71c
1
Top strap
2
Rear cover
4. Install the rear cover as shown in the illustration
A .
For instructions to install the child restraint system, see “Type
of child restraint system” on page 126.
When the top strap is not used, install the rear cover as shown
in illustration
B .
CAUTION
Make sure the top strap is securely latched, and
check that the child restraint system is secure by
pushing and pulling it in different directions.
Follow all the installation instructions provided by its
manufacturer.
Installation with child restraint lower
anchorages
16sa72
The lower anchorages for the child restraint system
interfaced with the FMVSS225 specification are installed
in the rear seat.
The anchorages are installed in the clearance between the
seat cushion and seatback of each rear seat.
Child restraint system interfaced with the FMVSS225
specification can be fixed with these anchorages. In this case,
it is not necessary to fix the child restraint system with a seat
belt on the vehicle.
To Next Page
Loading...
