GAUGES, METERS AND SERVICE REMINDER INDICATORS
58
Other Areas
Zone Number
A. Samoa
Hawaii
Guam
Saipan
Puerto Rico
7
7
9
9
11
CAUTION
Do not adjust the display while the vehicle is moving.
Be sure to adjust the display only when the vehicle is
stopped.
13sa07b
After you select the zone number, push the “ODO/TRIP”
button. “−−” blinks on the display. Then perform the circling
calibration according to the following procedure.
13sa08
Drive the vehicle slowly (at 8 km/h (5 mph) or lower) in a circle
until the direction is displayed. If there is not enough space to
drive in a circle, drive around the block until the direction is
displayed.
After driving in 1 to 3 circles in the above method, calibration
is complete with the direction shown on the display.
If calibration cannot be performed because of the vehicle is
magnetized, take your vehicle to a Lexus dealer.
If you want to cancel the calibration before it is complete, push
the “ODO/TRIP” button while “−−” is blinking on the display.
Do not perform circling calibration of the compass in a place
where the earth’s magnetic field is subject to interference by
artificial magnetic fields (underground parking, under a
steel tower, between buildings, roof parking, near a
crossing, near a large vehicle, etc.).
During calibration, do not operate electric systems
(retractable hardtop, power windows, etc.) as they may
interfere with the calibration.
To Next Page
Loading...
