300598802_002_C0 - 10/2016 - © Leybold 25
Maintenance
5.2 Leybold Service
Whenever you send a pump to Leybold, indicate whether the pump is contami-
nated or is free of substances which could pose a health hazard. If it is con-
taminated, specify exactly which substances are involved.
You must use the form we have prepared for this purpose; we will forward the
form on request.
A copy of the form is printed at the end of these operating instructions:
„Declaration of contamination of vacuum equipment and components“.
Another suitable form is available from the Leybold home-page:
www.leybold.com → Downloads → Download Documents → Declaration of
Contamination
Connect the form at the device or lay it to the device.
This statement detailing the contamination is required to satisfy legal require-
ments and for the protection of our employees.
Pumps which are not accompanied by a contamination statement will be re-
turned to the sender.
Use secure shipping packaging
Package the pump such that it will not suffer any damage when being
shipped and so that no oil or hazardous materials can escape from the
packaging.
CAUTION
To Next Page
Loading...
Need help?
General
