Lezyne Micro Drive - Warranty, Mounting, and Operation; Warranty Coverage; Mounting Instructions; Basic Operation

Warranty:
In the U.S. and U.K., Lezyne LED Lights carry a two (2) year warranty from the original purchase date
to the original owner (proof of purchase is required). This warranty covers materials and
manufacturing defects on the LED light housing, electronics, LED, and the mounting bracket supplied.
Lezyne Batteries carry a 6-month warranty against any manufacturing defects. Issues not covered by
the warranty include normal wear and tear, improper installation, attempting to access electronics,
modifying electronics, damage or failure due to accident, misuse, abuse, and neglect. For warranty
issues outside of the United States, please contact the distributor/retailer for your country or region
directly.
Mounting:
Operation:
Daytime safety mode (Micro Drive Rear ONLY): With the light off, press and hold the power button
for five (5) seconds, until the light flashes. The light will now enter a brighter flash mode for
daytime riding. Once turned off the light will return to normal.
Run Times and Modes:
Battery Monitor: Lezyne LED Lights are equipped with a battery monitor to indicate the remaining run
time during use. A green and red LED located in the power button show the battery status.
Battery Check: When the light is OFF you can check the charge level. Click the power button once to
display the charge status for 2 seconds. A red LED means you should charge the light before your ride.