LG-Ericsson iPECS ES-4550G User Manual (English)

Other manuals for LG-Ericsson iPECS ES-4550G

Questions and Answers:

G
gallenAug 5, 2025
Why can't I connect to my LG-Ericsson iPECS ES-4550G Switch using Telnet?
- C
  Crystal WebbAug 6, 2025
  If you're having trouble connecting to the LG-Ericsson Switch via Telnet, web browser, or SNMP, verify the switch is powered on and check the network cabling between your management station and the switch. Ensure you have a valid network connection and that the port you're using hasn't been disabled. Also, confirm that the VLAN interface, through which the management station is connected, is configured with a valid IP address, subnet mask, and default gateway. Make sure the management station's IP address is in the same subnet as the switch's IP interface. If connecting via a tagged VLAN group IP address, your management station and the ports connecting intermediate switches must be configured with the appropriate tag.
Z
Zachary RodriguezAug 14, 2025
What to do if I cannot connect to LG-Ericsson iPECS ES-4550G Switch using Secure Shell?
- C
  Courtney SparksAug 15, 2025
  If you cannot connect to the LG-Ericsson Switch using SSH, it's possible that you've exceeded the maximum number of concurrent Telnet/SSH sessions. Try connecting again later. Ensure that the SSH server's control parameters are correctly configured on the switch and that your SSH client software is properly configured on your management station. Also, verify that you've generated both an RSA and DSA public key on the switch, exported this key to the SSH client, and enabled the SSH service. Confirm that you've set up an account on the switch for each SSH user, including a username, authentication level, and password. If using public key authentication, ensure you've imported the client's public key to the switch.
S
sandra37Aug 26, 2025
How to access LG-Ericsson iPECS ES-4550G Switch configuration program via serial port?
- K
  kim30Aug 26, 2025
  If you're unable to access the onboard configuration program of your LG-Ericsson Switch via a serial port connection, ensure your terminal emulator program is set to VT100 compatible with 8 data bits, 1 stop bit, no parity, and the baud rate is set to 9600, 19200, 38400, 57600, or 115200 bps. Also, check that the null-modem serial cable conforms to the pin-out connections provided.

LG-Ericsson iPECS ES-4550G Specifications

General

Switch Type	Managed
Ports	48 x 10/100/1000Base-T
Management	Web, CLI, SNMP
Dimensions (W x D x H)	440 x 260 x 44 mm
Weight	4.5 kg
Operating Temperature	0°C to 45°C
MAC Address Table Size	16K
PoE	Yes
Jumbo Frame Support	9K
Power Supply	AC 100-240V, 50/60 Hz
Form Factor	Rack-mountable

Related product manuals

LG-Ericsson iPECS ES-2024G

60 pages

LG-Ericsson iPECS ES-2026P

60 pages

LG-Ericsson iPECS ES-4550G User Manual

Table of Contents

Other manuals for LG-Ericsson iPECS ES-4550G

Questions and Answers:

LG-Ericsson iPECS ES-4550G Specifications

Related product manuals