EasyManua.ls Logo

LG-Ericsson iPECS ES-2026P - User Manual

Default Icon
60 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
U
SER
G
UIDE
iPECS is an Ericsson-LG Brand
Please read this manual carefully before
operating your set. Retain it for future reference.
ES-2026/ES-2026P
Installation Manual

Table of Contents

Questions and Answers

  • J
    Jamie DelgadoAug 10, 2025
    What to do if Link LED is off on my LG-Ericsson iPECS ES-2026P Switch?
    • M
      Martin KaneAug 10, 2025
      If the Link LED is off on your LG-Ericsson Switch, ensure both the switch and the connected device are powered on. Verify the cable is securely plugged into both the switch and the device. For rack-mounted switches, inspect connections to the punch-down block and patch panel. Confirm you're using the correct cable type and it's within specified length limits. Finally, check the adapter and cable for defects, replacing them if necessary.
  • S
    Stephen JonesAug 15, 2025
    What to do if my LG-Ericsson iPECS ES-2026P powers off after running for a while?
    • T
      Timothy BennettAug 15, 2025
      If your LG-Ericsson Switch powers off after running for a while, check for loose power connections, power losses, or surges at the power outlet. If the issue persists, the internal power supply may be defective; in that case, contact your dealer for assistance.
  • E
    Elizabeth JohnsAug 20, 2025
    What to do if PWR LED is Off on my LG-Ericsson iPECS ES-2026P Switch?
    • A
      Andrew TaylorAug 20, 2025
      If the PWR LED is off on your LG-Ericsson Switch, check the connections between the switch, the power cord, and the wall outlet. If the problem persists, contact your dealer for assistance.
  • A
    Angela MartinAug 26, 2025
    What to do if DIAG LED is Flashing on my LG-Ericsson iPECS ES-2026P Switch?
    • A
      Anthony GrossAug 26, 2025
      If the DIAG LED is flashing on your LG-Ericsson Switch, power cycle the switch to try and clear the condition. If the condition does not clear, contact your dealer for assistance.
  • F
    fordkimberlyAug 30, 2025
    What to do if PWR LED is Amber on my LG-Ericsson iPECS ES-2026P Switch?
    • S
      Sophia CastroAug 30, 2025
      If the PWR LED is amber on your LG-Ericsson Switch, it indicates that the internal power supply has failed. Contact your local dealer for assistance.
  • A
    anthony64Sep 4, 2025
    What to do if power indicator does not turn on when the power cord is plugged in my LG-Ericsson iPECS ES-2026P?
    • B
      Betty NixonSep 4, 2025
      If the power indicator does not turn on when the power cord is plugged into your LG-Ericsson Switch, it may indicate a problem with the power outlet, power cord, or internal power supply.

LG-Ericsson iPECS ES-2026P Specifications

General IconGeneral
PoE SupportYes
PoE Budget370W
LayerLayer 2+
MAC Address Table Size8K
ManageableYes
AC Input Voltage100-240VAC, 50/60Hz
Operating Temperature0°C to 45°C
Storage Temperature-20°C to 70°C
Operating Humidity10% to 90% non-condensing
Dimensions440 x 44 mm
FeaturesLink Aggregation, IGMP Snooping
Jumbo Frame SupportYes
ManagementWeb GUI, CLI, SNMP
VLAN SupportYes
Quality of Service (QoS)IEEE 802.1p
Security FeaturesPort Security
Standards ComplianceIEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Ports24 x 10/100/1000BASE-T PoE+ ports, 4 x SFP Gigabit uplink ports

Related product manuals