Do-Not-Disturb
Makes your extension
unavailable for calls
Press DND button to activate.
Press DND button again to deactivate.
Please note that this is not available on the attendant handset.
Ad Hoc Conference Calls
(3 way calling)
To call the rst party, follow “Making an External/internal Call” above for instructions.
Once connected press the CONF soft button once.
Call the second party (as above).
Once connected, press the CONF soft button twice to connect the calls.
To place a conference call on hold, press the Hold/Save button. Press again to retrieve the
conference.
Programming Call Forward
Routes your calls to another extension/
group/speed dial
(this will override your voicemail
functions.)
Lift the handset.
Press the FWD soft button.
Dial the type of forward code 1-4.
Dial the destination number.
To deactivate, follow the rst two steps then Dial #.
Transferring a Call
Press the Transfer button.
Dial the extension number, external number or press the programmed ex button.
Either speak to the recipient to announce the call or simply hang up.
Returning to Caller from a Transfer
Press the green ashing Loop/Line ex button.
Camp On
When dialing an extension that is engaged, the Camp On feature allows the station to be notied
that there is a call waiting. Press * to wait off-hook.
Transferring a call
Features
Call waiting
Speed Dial
Lift the handset
Press the Speed button
Dial the desired System or Station Speed Dial number
Last Number Redial (LNR)
Lift the handset.
Select the REDIAL soft button
Use the Volume keys to select from the last 10 numbers dialed
Press Hold/Save or the SEND soft button to dial
Quick access call tools
To Previous Page
Loading...
Need help?
General
