LDP-9208D Button Layout
10. Speaker
9. Volume
Ericsson-LG iPECS
LDP-9208D Handset Key Features Guide
1. LCD Screen: displays your phones status,
dialing directories, and text message information.
2. Flexible Button (‘Flex key’): a line or feature
your system administrator for help.
3. Speed: assign or use assigned speed dial
numbers.
4. DND (Do-Not-Disturb): blocks incoming calls.
You can also activate Do-Not-Disturb while the
phone is ringing. Use to allow you to forward all
calls to another number.
5. Mute: mute the call so that the caller cannot
hear your voice.
6. Trans/PGM: transfer the current active call or
access the Program menu while the phone is
idle.
7. Call Back: when a light shows on the call back
button this indicates you have a message, use to
access your Voice Mailbox.
8. Hold/Save: use to place a call on Hold. Also,
use to access a held call. In menu mode, it saves
your inputs.
9. Volume control: adjust the ring, headset,
handset, and speaker volume.
10. Speakerphone: toggle the speakerphone on
illuminate when the phone is in menu mode.
3.
4.
5.
6.
7.
Button Guide
2. Flexible button
(‘Flex key’)
1. LCD Screen
Answering an Incoming Call
the call will be connected.
You may also use pick up codes assigned by your installer engineer to answer other ringing handsets
from your desk phone.
before lifting the handset.
Making an External Call
or dial 9 to pick up an outside line.
Once you have the outside line, dial your number.
Making an Internal Call
y assigned to the contact.
Rejecting a Call
Press the DND button when a call comes in - the caller will get a busy tone.
Placing a call on hold
During a call, press the Hold/Save button.
Dealing with calls
8.
To Next Page
Need help?
General
