204
Setup and Upgrade
3 When the Create New Password screen appears, enter a password and press the [Enter] key. The
password should not exceed 20 characters and should consist of English letters (A - Z), numbers
(0 - 9), and special characters or a combination of them.
4 When the Confirm New Password screen appears, enter the password once again and press the
[Enter] key.
5 To save the changes in the system setup, press [F10].
6 When the Save & Reset screen appears, select [Yes] and press the [Enter] key. The PC will restart.
TIP
• With Supervisor Password, you are authorized to set all items in the System Setup and
to set [Power on Password]. In case other people also use the PC, it is recommended to
set the User Password.
ENGLISH
To Next Page
Loading...
