11
Installation
Connection of
Connection of
TV
TV
Basic connection
Basic connection
1. Connect the cables as necessary.
After connecting the cables neatly,arrange the cables to the Cable Holder. To connect an
additional equipment,see the Connection of external equipment section.
2. Install the Cable management as shown.
Note: Here shown may be somewhat different from your set.
First, press the cable management.
Hold the Cable management with both hands and pull it upward.
Note: Do not hold the CABLE MANAGEMENT when moving the product.
(If the product is dropped,you may be injured or the product may be broken.)
1. Connect the aerial cable to the socket marked ANTENNA IN
on the back. For the best reception an outdoor aerial should
be used.
2. To connect an additional equipment, see the Connection of
external equipment section.
3. Connect the power cord.
Note: Here shown may be somewhat different from your set.
To Next Page
Loading...
