226
Setup and Upgrade
3 When the Password Setting screen appears, enter a password and press the [Enter] key. The
password should not exceed 20 characters and should consist of English letters (A - Z), numbers
(0 - 9), and special characters or a combination of them.
4 When a pop-up window appears, press the [Enter] key.
5 To save the changes in the system setup, press [F10].
6 When a pop-up window appears, select [Yes] and press the [Enter] key. The PC will restart.
TIP
• With Supervisor Password, you are authorized to set all items in the System Setup and
to set Power on Password. In case other people also use the PC, it is recommended to set
the Set User Password.
ENGLISH
To Next Page
Loading...
