Setup and Upgrade
201
Setting the Boot Password
This process is to set a password so that other people cannot use the computer or change the
settings.
The user can set a password while booting the system or setting up the system.
The model in the example can differ from actual models and is subject to change for performance
improvements, without prior notice.
CAUTION
Without the registered password, access to the system will be denied. Write down and keep the
password in a safe place.
Set Supervisor Password
The password prevents unauthorized people from accessing the PC. By default, no password is set for
the machine. If an unauthorized person changes the password in the System Setup, you will be unable
to access the system.
TIP
With [Set Super visor Password], you are authorized to set all items in the System Setup and
to set [Power on Password]. In case other people also use the computer, it is recommended to
set the [Set User Password].
ENGLISH
To Next Page
Loading...
