Setup and Upgrade
203
3 When the Password Setting screen appears, enter a password and press the [Enter] key.
The password should not exceed 20 characters and should consist of English letters (A - Z),
numbers (0 - 9), and special characters or a combination of them.
4 Enter the password once more and press the [Enter] key.
5 To save the changes in system setup, press [F10]. When a pop-up window appears, select [Yes]
and press the [Enter] key.
6 The PC will restart.
Set User Password
The password set in [Set User Password] is of a lower level than the one set in [Set Super visor
Password], so you can set a user password only after setting a password in [Set Supervisor
Password].
TIP
[Set User Password] allows limited access to the items in the System Setup screen compared
to the [Set Supervisor Password] items.
ENGLISH
To Next Page
Loading...
