Setup and Upgrade
213
Initializing System Setup
If you have changed the system setup by mistake, you can restore the default settings.
The model in the example can differ from actual models and is subject to change for performance
improvements, without prior notice.
1 Execute the System Setup screen, go to [Exit] > [Load Setup Defaults] using the arrow keys and
press the [Enter] key.
TIP
You can press the [F9] key to use the [Load Setup Defaults] item.
2 When a pop-up window appears, select [Yes] and press the [Enter] key. The settings will be reset
to the factory default.
ENGLISH
To Next Page
Loading...
