EasyManuals Logo

LG 16T90R Series User Manual

LG 16T90R Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
7 Pre-Tech Support Checklist
ENGLISH
Symptom Cause and Solution
The screen color
does not display
properly.
Check if Reader Mode is on. When the Reader mode
is on, turn the setting off.
-
Press the Start button [ ] to turn the [All apps]
> [LG Smart Assistant] > [Display Setting] >
[Reader Mode] settings off.
Using the Reader mode and the Night mode at
the same time can cause color distortion. Turn the
Reader mode settings off or change the Night mode
to [Off].
-
Turning off Night light: Press the Start button
[ ] and select Settings [ ] > [System] >
[Display] > [Night light] > [Off].
If the screen still does not properly display, contact
the LG Electronics service center.
-
Reader mode controls the brightness and color
of the LCD screen to look like printed paper and
protect the user from eyestrain.
The power does not
turn on.
Check if the power cord is connected.
After disconnecting the power cord and reconnecting
it, press the power button of the product.
Symptom Cause and Solution
The system stops
during use or does
not properly turn
off.
Press the power button for approximately 6 seconds
to reset the system. Once the system is reset, press
the power button again to turn on the computer.
-
Caution: Unsaved data may be lost. Pressing the
power button while the PC is in use may cause
damage to the hard disk or a system error.
After resetting the system, run “Setup Defaults” in
the system setup. (For more information on how
to run “Setup Defaults”, refer to “Initializing System
Setup” under “Setup and Upgrade” in the LG Easy
Guide of the LG PC Manuals.)
The touchpad is
not functioning
properly.
Press the Start button [ ] and run [All apps] >
[LG Smart Assistant]. Then press [Dashboard] >
[Touchpad].
If the touchpad does not function properly, the
touchpad is either in the Touchpad Off (disabled)
state or Touchpad Auto (disabled when the mouse is
connected) state.
-
For details on the touchpad settings, refer to the
LG Easy Guide of the LG PC Manuals.
You selected the
wrong display
language for
Windows.
Refer to [Recovering the System] in LG Easy Guide
of the LG PC Manuals to initialize the PC and set the
language again.
All data will be lost during the initialization, so you
must back up all critical data in advance.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG 16T90R Series and is the answer not in the manual?

LG 16T90R Series Specifications

General IconGeneral
BrandLG
Model16T90R Series
CategoryLaptop
LanguageEnglish

Related product manuals