Connect the power plug properly by pushing it to the end.
• If a contact failure occurs, it may cause product damage or fire.
Do not bend the power cable for AC adapter too much or get stamped by a
sharp object.
• The wires inside the cable may break and cause electric shock or fire.
Do not use loose plugs or damaged power cords.
• An electric shock or fire may occur.
Do not touch the power cord with your hands wet.
• Otherwise, an electric shock may occur.
Pull the plug, not the cord, to disconnect the AC adapter and power jack.
• Otherwise, a fire or product damage may occur.
Operate the product at the proper voltage.
• Excessive voltage may result in damage on the product, electric shock or fire.
Use power outlets with an earth pin installed and proper supply of rated
electricity.
• An electric leakage may cause an electric shock or fire.
• The shape of the power cord and outlet may differ by country and region.
In the case of strange noise from the cord or plug, disconnect the power
cord from the outlet immediately and contact the service center.
• A fire or electric shock may occur.
Use the power supply/adapter provided with the product and never
disassemble the product.
• Using a different product or disassembling it may cause an electric shock or
fire.
ENGLISH
To Next Page
Loading...
Need help?
General
