DVD SETUP
Component Connection
1. How to connect
O
O
Connect the video outputs (Y, PB,PR) of the DVD to the COM-
PONENT IN VIDEO* or COMPONENT IN VIDEO
1*/2" jacks on the TV. Match the jack colors (Y = green, PB=
blue, and PR= red).
Connect the audio outputs of the DVD to the COMPO-
NENT IN AUDIO* orCOMPONENT IN AUDIO 1"
/2" jacks on the TV.
* COMPONENT IN VIDEO/AUDIO
:For 19/22/26/32/37/42LH20R, 32/42LF20FR,
32/37/42/47LH30FR, 19LU50R,22/26LU50FR
* COMPONENT IN VIDEO l/AUDIO 1,
COMPONENT IN VIDEO 2/AUDIO 2
: For42/47/55LH50YR, 32/42/47LH70YR, 42/47LH90QR
x
-4
z
JO
c
i
"O
m
z
-4
m
-4
C
-O
2. How to use
i Turn on the DVD player, insert a DVD.
i Select the Component* orComponentl */2" input source
on the TV using the INPUT button on the remote control.
i Refer to the DVD player's manual for operating instructions.
* Co m po ne nt: For19/22/26/32/37/42 LH20R,32/42 LF2OFR,
32/37/42/47LH30FR, 19LU50R,22/26LU50FR
* Corn portent I/2: For42/47/55LH50YR, 32/42/47LH70YR,
42/47LH90QR
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
31