To Next PageTo Next PageHow to fix a mono or abnormal screen color on my LG Monitor?
If the screen color on your LG Monitor is mono or abnormal, first check that the signal cable is properly connected, tightening it with a screwdriver if necessary. Next, ensure that the video card is correctly inserted in its slot. Finally, verify that the color setting is set higher than 24 bits (true color) in the Control Panel settings.
What to do if my LG Monitor shows 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found'?
If you see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on your LG monitor, install the display driver from the display driver CD (or diskette) that comes with your display. You can also download the driver from http://www.lg.com. Make sure to check if the video card supports Plug&Play function.
How to unlock OSD on LG Monitor?
To unlock the OSD controls on your LG Monitor when you see the 'OSD LOCKED' message, push the MENU button for several seconds until the message 'OSD UNLOCKED' appears.
What to do if my LG 20MP47A shows 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message?
If you see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on your LG Monitor, install the display driver from the CD or diskette that came with it, or download the driver from the LG website. Also, make sure your video card supports the Plug&Play function.
Why is the screen color on my LG Monitor mono or abnormal?
If the screen color on your LG monitor is mono or abnormal, check if the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, ensure the video card is correctly inserted in its slot. Finally, set the color setting to higher than 24 bits (true color) in Control Panel settings.
What to do if LG 20MP47A display image is incorrect?
If the display image on your LG Monitor is incorrect, press the AUTO button to automatically adjust the image to the ideal setting. Alternatively, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution. Ensure that the color setting is higher than 24 bits (true color).
How to fix no image on LG 20MP47A?
If no image appears on your LG Monitor, ensure the power cord is properly connected to the outlet and that you've pressed the power button. Also, adjust the brightness and contrast settings. If the monitor is in power saving mode, try moving the mouse or pressing a key. Verify that your PC is turned on. If the signal from the PC is out of the monitor's frequency range, consult the 'Specifications' section of the manual to reconfigure your display. The monitor enters DPM mode if it remains on 'No-Signal' for 5 minutes.
How to unlock the OSD controls on my LG 20MP47A?
If you see an "OSD LOCKED" message on your LG Monitor screen, you can unlock the OSD controls by pushing the MENU button for several seconds until the message 'OSD UNLOCKED' appears.
What to do if I see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on my LG Monitor?
If you see the message "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" on your LG Monitor, install the display driver from the CD or diskette that came with your display. Alternatively, download the driver from the LG website. Also, ensure that your video card supports the Plug&Play function.
What to do if my LG 20MP47A Monitor screen is flickering?
If your LG Monitor screen is flickering, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
General| Screen Size | 19.5 inches |
|---|---|
| Resolution | 1600 x 900 |
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Brightness | 200 cd/m² |
| Response Time | 5 ms |
| Refresh Rate | 60 Hz |
| Contrast Ratio | 1000:1 |
| Connectivity | VGA |
| Viewing Angle | 178°/178° |
| Power Consumption | 18W |
