29
ENGLISH
[Picture]
NOTE
• The [Picture Mode] that can be set depends on the Input signal.
[Menu] > [Picture]
Description
[Picture Mode]
[Custom] Allows the user to adjust each element.
[Mono]
Mono (black and white) color mode.
[Pathology]
Turn on pathology mode. Image clarity and accuracy as if you were looking at a microscope.
[Text]
Optimizes the screen for text documents. You can brighten the screen in the OSD menu.
[DICOM] A mode that optimizes the screen settings so you can view images for medical use.
NOTE
• Adjusts the brightness of screen in [DICOM(Custom)] mode.
[DICOM(Custom)]
[Calibration 1] Adjusts to the last calibrated screen.
[Calibration 2] Adjusts to the previously calibrated screen.
NOTE
• If the [Picture Mode] is changed in the DP (DisplayPort) input, the screen may flicker or the resolution of your PC screen may be affected.
• [Calibration 2]: Installation of will enable this menu.