Why is the color on my LG 24UD58 Monitor display abnormal?
S
Stacey WilliamsSep 6, 2025
If the display color on your LG monitor is abnormal, try the following:
- Set the color to 24 bit (true color) or higher by navigating to Control Panel > Display > Settings > Color Quality in Windows.
- Check if the signal cable is connected properly. Reconnect the cable or reinsert the PC's graphics card.
- Note that some color variations are not errors and are unrelated to the monitor's performance.
L
Laura NelsonAug 23, 2025
What to do if LG 24UD58 Monitor screen display is unstable?
T
Troy HardyAug 25, 2025
If the screen display on your LG Monitor is unstable, shaky, or images leave shadow trails, and the resolution is set to HDMI 1080i 60/50 Hz (interlaced), this could be the cause. Try changing the resolution to 1080P or the recommended resolution for your monitor.
M
Melissa LesterAug 25, 2025
What to do if my LG 24UD58 is unrecognized?
R
racheltorresAug 26, 2025
To resolve the "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on your LG monitor, install the display driver from the LG website: http://www.lg.com. Also, ensure that your video card supports the Plug&Play function.
E
Elizabeth NealAug 26, 2025
Why is there no sound from my LG 24UD58?
J
Jason EdwardsAug 26, 2025
If you are experiencing no sound from the headphone port or speaker on your LG Monitor, first try increasing the volume using the monitor's buttons. Next, set the audio output of your PC to the monitor. On Microsoft Windows, go to Control Panel > Hardware and Sound > Sound and set the LG monitor as the default device.
B
Brandi WilcoxAug 27, 2025
What to do if there is no sound from LG Monitor headphone port or speaker?
J
James HeathAug 27, 2025
If there is no sound from the headphone port or speaker of your LG Monitor, try the following:
* Increase the volume using the button on the monitor.
* Set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel > Hardware and Sound > Sound and set the monitor as the default device.
S
Scott TranSep 12, 2025
How to fix unstable and shaky screen display with shadow trails on LG Monitor?
S
Sharon WilkersonSep 13, 2025
If your LG Monitor's screen display is unstable, shaky, or images leave shadow trails, it might be due to the resolution being set to HDMI 1080i 60/50 Hz (interlaced). Change the resolution to 1080P or the recommended resolution to resolve this issue.
G
gsmithSep 14, 2025
How to turn off OSD lock message on LG 24UD58?
S
Sean HopkinsSep 14, 2025
If the OSD lock message is being displayed on your LG Monitor, go to Menu > General and set OSD Lock to Off.
J
Jordan HoldenSep 5, 2025
What to do if my LG Led monitor screen retains an image?
J
Jerry BatesSep 5, 2025
Displaying a still image for a prolonged time may cause damage to the screen of your LG Led monitor, resulting in the retention of the image. To extend the lifetime of the monitor, use a screensaver.
M
Marcus RileySep 2, 2025
How to fix a blank screen on my LG Led monitor?
J
Justin SmithSep 3, 2025
If nothing appears on your LG Led monitor, first, ensure the power cord is properly connected to the power outlet. Then, verify the power cable connection and press the power button. Make sure the correct input is enabled by going to Menu > Quick Settings > Input. If the monitor is in sleep mode, try moving the mouse or pressing any key on the keyboard. Also, confirm that your computer is turned on. If the issue persists and signals from your PC are out of range, refer to the Product Specification section of the manual to set the appropriate frequency. Finally, check and reconnect the signal cable between the PC and the monitor to make sure it is connected.
K
kimberly52Sep 4, 2025
Why is my LG Led monitor screen shaky?
M
Mark AllenSep 4, 2025
To resolve an unstable or shaky screen display, or images leaving shadow trails on your LG Led monitor, especially if you're using HDMI 1080i 60/50 Hz (interlaced) resolution, change the resolution to 1080P or the recommended resolution.
To Next Page
General
