LG 24MP450 User Manual (English)

Other manuals for LG 24MP450

Questions and Answers:

R
rprinceJul 29, 2025
How to fix LG Monitor when no image appears?
- J
  Joseph JacksonJul 29, 2025
  If no image appears on your LG Monitor, start by checking that the power cord is properly connected to the power outlet. Also, verify that the signal cable between your PC and the monitor is securely connected. You may also unlock the OSD controls by entering the OSD lock menu and changing items to off. Check Control Panel - Display - Settings to see if the frequency or the resolution were changed and readjust the video card to the recommended resolution, if needed. Make sure to select the recommended resolution. If problems persist, consult your computer or video card manufacturer.
B
Brandy JacksonAug 5, 2025
Why does my LG 24MP450 display 'No Image'?
- B
  brightmaryAug 5, 2025
  There are several reasons why your LG Monitor might not be displaying an image: * Ensure the power cord is properly connected to the power outlet. * The signal cable between your PC and the monitor may be missing or disconnected; check the cable and reconnect it. * The signal from the PC (video card) might be out of the horizontal or vertical frequency range of the display. Refer to the 'Specifications' section of this manual and configure your display again. * The OSD controls may be locked. You can unlock them by entering the OSD lock menu and changing items to 'off'.
J
Jonathan WilliamsAug 13, 2025
Why does my LG 24MP450 say 'out of range'?
- J
  Jody WilsonAug 13, 2025
  The message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.
J
Jose HancockAug 21, 2025
What to do if the display image is incorrect on LG 24MP450?
- K
  katiesandersAug 21, 2025
  If the display image on your LG Monitor is incorrect, ensure the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, verify that the video card is correctly inserted in its slot. Set the color setting higher than 24 bits (true color) in Control Panel - Settings. If the screen is set to interlace mode, change it to the recommended resolution. If you are using HDMI 1080i 60/50 Hz resolution, change to the recommended resolution 1080P. Be sure to install the display driver from the LG website and check if your video card supports Plug&Play.

LG 24MP450 Specifications

General

Screen Size	24 inches
Panel Type	IPS
Aspect Ratio	16:9
Refresh Rate	75 Hz
Brightness	250 cd/m²
Contrast Ratio	1000:1
Connectivity	HDMI, VGA
Viewing Angle	178° (H) / 178° (V)
Resolution	1920 x 1080 (FHD)
Response Time	5ms
VESA Mount Compatible	100 x 100 mm