T
Tara MccoyJul 29, 2025
Why is my LG 24MP56HQ screen flickering?
- Jjonathan29Jul 29, 2025
If your LG Monitor screen is flickering, and the selected resolution is HDMI 1080i 60/50 Hz, change the resolution to the recommended resolution of 1080P.
To Next PageTo Next PageWhy is my LG 24MP56HQ screen flickering?
If your LG Monitor screen is flickering, and the selected resolution is HDMI 1080i 60/50 Hz, change the resolution to the recommended resolution of 1080P.
What to do if no image appears on my LG 24MP56HQ?
If no image appears on your LG Monitor, ensure the power cord is properly connected to the power outlet and that you have pressed the Power button. Also, adjust the brightness and contrast settings. If the display is in power saving mode, try moving the mouse or pressing a key on the keyboard. Ensure that the PC is turned on. If you see a message indicating the signal from the PC is out of range, consult the 'Specifications' section of the manual and configure your display accordingly. Note that the monitor goes to DPM mode if it is on 'No-Signal' for 5 minutes.
How to fix incorrect display image on LG 24MP56HQ Monitor?
To correct an incorrect display image on your LG Monitor, first, press the AUTO button to automatically adjust the display image to the ideal setting. Also, check the display settings in your computer's Control Panel and adjust the resolution to the recommended setting. Ensure that the color setting is set higher than 24 bits (true color).
Why is the screen color mono or abnormal on my LG Monitor?
If the screen color on your LG Monitor is mono or abnormal, check that the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, ensure that the video card is properly inserted in its slot. Finally, verify that the color setting is set higher than 24 bits (true color) in the Control Panel settings.
What to do if I see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on my LG Monitor?
If you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on your LG Monitor, install the display driver from the CD or diskette that came with your display. Also, make sure to check if the video card supports Plug&Play function.
How to unlock OSD on LG 24MP56HQ?
To unlock the OSD controls on your LG Monitor, push the MENU button for several seconds until the message 'OSD UNLOCKED' appears.
General| Panel type | AH-IPS |
|---|---|
| Aspect ratio | 16:9 |
| Backlight type | W-LED |
| Display surface | Matt |
| Display diagonal | 23.8 \ |
| Separate H/V sync | Yes |
| Display technology | LED |
| Vertical scan range | 56 - 75 Hz |
| Horizontal scan range | 30 - 83 kHz |
| Supported video modes | 1080p |
| Contrast ratio (dynamic) | 5000000:1 |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | - |
| Display brightness (typical) | 250 cd/m² |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| USB Type-A downstream ports quantity | 0 |
| Product color | Black, Grey |
| LED indicators | Power |
| Tilt angle range | 20 - -5 ° |
| Panel mounting interface | 75 x 75 mm |
| AC input voltage | 100 - 240 V |
| AC input frequency | 47/63 Hz |
| Annual energy consumption | 35 kWh |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 24 W |
| Cables included | VGA |
Weight and Dimensions| Depth (with stand) | 188 mm |
|---|---|
| Height (with stand) | 436 mm |
| Weight (with stand) | 3100 g |
| Depth (without stand) | - mm |
| Width (without stand) | 554 mm |
| Weight (without stand) | - g |
Step-by-step guide for installing and removing the monitor's stand base.
How to connect the monitor to a PC using D-SUB and HDMI cables.
How to access and navigate the monitor's On-Screen Display (OSD) menu.
Adjusting brightness, contrast, response time, and image clarity.
Customizing gamma, color temperature, hue, and saturation for desired colors.
Accessing and configuring smart energy saving, picture modes, resolution, and dual features.
Solutions for when the monitor screen remains blank or shows no signal.
Troubleshooting steps for incorrect screen colors, positioning, or flickering.
