LG 24MP55HQ-P.AUS - User Manual

Questions and Answers

M
Michelle WestSep 23, 2025
How to unlock the OSD on my LG 24MP55HQ-P.AUS?
- D
  dawnpettySep 23, 2025
  You can unlock the OSD controls on your LG Monitor at any time by pushing the MENU button for several seconds until the message “OSD UNLOCKED” appears.
M
Michael FrancisAug 25, 2025
How to stop my LG Monitor screen from blinking?
- A
  Andrea ColemanAug 25, 2025
  To stop your LG Monitor screen from blinking, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
R
Rachel OrrAug 25, 2025
What to do if my LG 24MP55HQ-P.AUS screen is flickering?
- R
  Ryan EwingAug 26, 2025
  If your LG Monitor screen is flickering, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
J
John BakerAug 27, 2025
What to do if no image appears on my LG Monitor?
- S
  Stephanie RodriguezAug 27, 2025
  If no image appears on your LG Monitor, try these steps: Ensure the power cord is properly connected to the outlet, press the Power button, adjust the brightness and contrast settings. If the display is in power saving mode, move the mouse or press a key. Also, verify that your PC is turned on. If a message appears indicating the signal from the PC is out of range, consult the 'Specifications' section of the manual to configure your display. Note that the monitor enters DPM mode if it's on "No-Signal" for 5 minutes.
J
James HensleyAug 27, 2025
What to do if display image is incorrect on LG 24MP55HQ-P.AUS Monitor?
- J
  Jeffrey JacobsAug 27, 2025
  If your LG monitor's display image is incorrect, press the AUTO button to automatically adjust the image to the ideal setting. Also, check Control Panel ? Display ? Settings and adjust the display to the recommended resolution, ensuring the color setting is higher than 24 bits (true color).
S
Samantha DavidsonSep 15, 2025
How to unlock OSD on LG Monitor if it is locked?
- K
  kathy40Sep 15, 2025
  If you see an "OSD LOCKED" message on the screen of your LG Monitor, you can unlock the OSD controls by pushing the MENU button for several seconds until the message “OSD UNLOCKED” appears.
A
Alexander LewisSep 13, 2025
What to do if my LG 24MP55HQ-P.AUS Monitor shows "Unrecognized monitor, Plug&Play (VESA DDC) monitor found"?
- E
  Eric BautistaSep 13, 2025
  If your LG Monitor displays the message "Unrecognized monitor, Plug&Play (VESA DDC) monitor found", install the display driver from the CD (or diskette) that came with your display. Also, verify that your video card supports the Plug&Play function.
S
Suzanne HillSep 14, 2025
How to fix the screen color if it is mono or abnormal on my LG Monitor?
- R
  rfergusonSep 14, 2025
  If the screen color on your LG Monitor appears mono or abnormal, check that the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, ensure that the video card is correctly inserted in its slot. Finally, verify that the color setting is set higher than 24 bits (true color) in the Control Panel settings.
M
Madison MillerSep 5, 2025
Why does my LG Monitor screen blink?
- S
  Steven TaylorSep 5, 2025
  If the screen of your LG Monitor blinks, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
C
Christopher WestSep 3, 2025
How to fix horizontal noise on LG 24MP55HQ-P.AUS?
- M
  Marie GreenSep 3, 2025
  If any horizontal noise appears in any image or characters are not clearly portrayed on your LG Monitor, first, press the AUTO button to automatically adjust your display image to the ideal setting. If the issue persists, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Also, ensure that the color setting is higher than 24 bits (true color).