Why is the screen color mono or abnormal on my LG 24MP88HV?
If the screen color on your LG Monitor is mono or abnormal, check if the signal cable is properly connected, tightening it with a screwdriver if needed. Also, ensure the video card is correctly inserted in its slot. Finally, set the color setting higher than 24 bits (true color) via Control Panel ? Settings.
How to fix LG 24MP88HV Monitor when no image appears?
If no image appears on your LG Monitor, ensure the power cord is properly connected to the power outlet. Also, press the Power button to turn on the monitor. If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard. Verify that the PC is turned on. Check the signal cable between the PC and the monitor and reconnect it if necessary. If the signal from the PC is out of the display's frequency range, consult the 'Specifications' section of the manual and configure your display again.
What to do if I see 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on LG 24MP88HV Monitor?
If you see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on your LG Monitor, be sure to install the display driver from the LG website. Also, make sure to check if the video card supports the Plug&Play function.
What to do if the screen blinks on my LG 24MP88HV?
If the screen blinks on your LG monitor, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
How to fix no image on LG 24MP88HV?
If no image appears on your LG Monitor, first ensure the power cord is properly connected to the power outlet and that the power button is pressed. If the monitor is in power saving mode, move the mouse or press any key on the keyboard. Also, verify that the PC is turned on. If the signal from the PC is out of range, consult the 'Specifications' section of this manual and reconfigure your display. Finally, the monitor might be in DPM mode if it has been on 'No-Signal' for 5 minutes.
Why is the screen color on my LG 24MP88HV Monitor mono or abnormal?
If the screen color on your LG Monitor appears mono or abnormal, check that the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, ensure the video card is correctly inserted in its slot. Finally, verify that the color setting is set higher than 24 bits (true color) in Control Panel settings.
How to correct the display position on LG Monitor?
If the display position is incorrect on your LG Monitor, use the Auto Configuration function and select the 'Yes' item to automatically adjust your display image to the ideal setting.
How to correct the display position on my LG 24MP88HV Monitor?
To correct the display position on your LG Monitor, use the Auto Configuration function and select the "Yes" item. This will automatically adjust your display image to the ideal setting.
How to fix horizontal noise or unclear characters on my LG Monitor?
To resolve horizontal noise or unclear characters on your LG Monitor, first, enter the Auto Configuration function and select "Yes" to automatically adjust the display image. If the issue persists, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution. You can also try setting the color setting higher than 24 bits (true color).
How to unlock OSD controls on LG 24MP88HV Monitor?
To unlock the OSD controls on your LG Monitor, go to the OSD lock menu and change the settings to 'off'.
Explains HDMI trademarks and licensing information.
Details MaxxAudio trademarks and licensing.
Lists and describes the contents of the monitor package.
Details the monitor's components and button functions.
Explains how to operate the monitor using the joystick button.
Shows and describes the monitor's input connection ports.
Provides instructions for safely moving and lifting the monitor.
Step-by-step guide to attach the monitor stand base.
Instructions on how to remove the monitor stand base.
Instructions for setting up the monitor on a table.
How to adjust the screen's viewing angle for comfort.
Information on using the Kensington security lock for theft deterrence.
Instructions and precautions for wall-mounting the monitor.
Connects the monitor to a personal computer.
Details the analog video connection via D-SUB.
Explains the digital video and audio connection via HDMI.
Connects the monitor to audio/visual devices.
Details how to connect headphones to the monitor.
Steps to access and navigate the monitor's main menu.
Adjusts basic settings like brightness, contrast, and volume.
Adjusts picture-related settings like mode and color.
Fine-tunes picture quality parameters like sharpness and response time.
Controls color temperature, gamma, and display properties.
Manages sound output, equalization, and special audio modes.
Configures language, power LED, standby, and OSD lock.
Automatically optimizes display settings for analog input.
Returns all settings to their factory defaults.
Selects predefined picture modes for different viewing scenarios.
Troubleshooting steps for when the display shows no image.
Solves problems with OSD control lock or unavailability.
Addresses problems like incorrect position or visible bars.
Fixes issues related to driver installation and Plug&Play detection.
Troubleshoots screen flickering problems, often related to resolution.
Technical details about the screen type and pixel pitch.
Specifies the maximum and recommended display resolutions.
Details the power usage in different operating modes.
Information about the AC-DC adapter and input voltage/current.
Specifies the output power of the built-in speakers.
Provides the physical measurements of the monitor.
States the weight of the monitor.
Indicates the adjustable tilt angles for the stand.
Lists operating and storage temperature/humidity limits.
Details horizontal and vertical sync frequencies.
Specifies signal input types like D-SUB and HDMI.
Information about Plug & Play (DDC) support.
Lists supported display modes and their timing specifications.
Explains the meaning of the power LED colors and states.
General| 3D | No |
|---|---|
| DDC/CI | Yes |
| Screen shape | Flat |
| Display diagonal | 23.8 \ |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Maximum refresh rate | - Hz |
| sRGB coverage (typical) | 99 % |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 16.78 million colors |
| Display brightness (typical) | 250 cd/m² |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| DisplayPorts quantity | 0 |
| Headphone connectivity | 3.5 mm |
| RMS rated power | 10 W |
| Audio system | MAXXAUDIO |
| TV tuner integrated | - |
| Feet color | Silver |
| Product color | White |
| Tilt angle range | -2 - 15 ° |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.3 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 17.8 W |
| Sustainability certificates | EPEAT Gold, ENERGY STAR |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth (with stand) | 186.2 mm |
|---|---|
| Height (with stand) | 414.5 mm |
| Weight (with stand) | 3200 g |
| Depth (without stand) | 46.6 mm |
| Width (without stand) | 541 mm |
| Height (without stand) | 313.3 mm |
To Next Page
