Why is the screen color mono or abnormal on my LG Monitor?
If the screen color on your LG Monitor is mono or abnormal, check if the signal cable is properly connected, tightening it with a screwdriver if needed. Also, ensure the video card is correctly inserted in its slot. Finally, set the color setting higher than 24 bits (true color) via Control Panel ? Settings.
How to fix LG Monitor when no image appears?
If no image appears on your LG Monitor, ensure the power cord is properly connected to the power outlet. Also, press the Power button to turn on the monitor. If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard. Verify that the PC is turned on. Check the signal cable between the PC and the monitor and reconnect it if necessary. If the signal from the PC is out of the display's frequency range, consult the 'Specifications' section of the manual and configure your display again.
What to do if I see 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on LG Monitor?
If you see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on your LG Monitor, be sure to install the display driver from the LG website. Also, make sure to check if the video card supports the Plug&Play function.
What to do if the screen blinks on my LG 24MP88HV-S.AEU Monitor?
If the screen blinks on your LG monitor, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
How to fix no image on LG 24MP88HV-S.AEU?
If no image appears on your LG Monitor, first ensure the power cord is properly connected to the power outlet and that the power button is pressed. If the monitor is in power saving mode, move the mouse or press any key on the keyboard. Also, verify that the PC is turned on. If the signal from the PC is out of range, consult the 'Specifications' section of this manual and reconfigure your display. Finally, the monitor might be in DPM mode if it has been on 'No-Signal' for 5 minutes.
Why is the screen color on my LG 24MP88HV-S.AEU mono or abnormal?
If the screen color on your LG Monitor appears mono or abnormal, check that the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, ensure the video card is correctly inserted in its slot. Finally, verify that the color setting is set higher than 24 bits (true color) in Control Panel settings.
How to correct the display position on LG 24MP88HV-S.AEU?
If the display position is incorrect on your LG Monitor, use the Auto Configuration function and select the 'Yes' item to automatically adjust your display image to the ideal setting.
How to correct the display position on my LG Monitor?
To correct the display position on your LG Monitor, use the Auto Configuration function and select the "Yes" item. This will automatically adjust your display image to the ideal setting.
How to fix horizontal noise or unclear characters on my LG Monitor?
To resolve horizontal noise or unclear characters on your LG Monitor, first, enter the Auto Configuration function and select "Yes" to automatically adjust the display image. If the issue persists, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution. You can also try setting the color setting higher than 24 bits (true color).
How to unlock OSD controls on LG Monitor?
To unlock the OSD controls on your LG Monitor, go to the OSD lock menu and change the settings to 'off'.
General| Screen Size | 24 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Response Time | 5 ms |
| Refresh Rate | 60 Hz |
| VESA Mount Compatible | Yes |
| Contrast Ratio | 1000:1 |
| Connectivity | HDMI, DisplayPort, D-Sub |
| Speakers | Yes |
| VESA Mount | 100 x 100 mm |
| Color Gamut | sRGB 99% |
| Ports | HDMI, DisplayPort |
| Viewing Angle | 178° |
To Next Page
