What to do if my LG 24MP88HV-S.AEU shows "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
If you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on your LG Monitor, install the display driver from the CD or diskette that came with your display. You can also download the driver from http://www.lg.com. Also, make sure to check if the video card supports Plug&Play function.
Why does my LG 24MP88HV-S.AEU screen blink?
If your LG Monitor screen blinks, this is because the screen is set to interlace mode. Change it to the recommended resolution to resolve the blinking.
What to do if display image is incorrect on LG 24MP88HV-S.AEU Monitor?
If the display image on your LG Monitor is incorrect, use the Auto Configuration function and select 'Yes' to automatically adjust the image to the ideal setting. Alternatively, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution or fine-tune the display image. Ensure that the color setting is set higher than 24 bits (true color).
Why is the screen color on my LG 24MP88HV-S.AEU mono or abnormal?
If the screen color on your LG Monitor appears mono or abnormal, check that the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, ensure the video card is correctly inserted in its slot. Finally, verify that the color setting is set higher than 24 bits (true color) in Control Panel settings.
How to fix no image on LG 24MP88HV-S.AEU?
If no image appears on your LG Monitor, first ensure the power cord is properly connected to the power outlet and that the power button is pressed. If the monitor is in power saving mode, move the mouse or press any key on the keyboard. Also, verify that the PC is turned on. If the signal from the PC is out of range, consult the 'Specifications' section of this manual and reconfigure your display. Finally, the monitor might be in DPM mode if it has been on 'No-Signal' for 5 minutes.
What to do if the screen blinks on my LG 24MP88HV-S.AEU Monitor?
If the screen blinks on your LG monitor, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
What to do if I see 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on LG Monitor?
If you see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on your LG Monitor, be sure to install the display driver from the LG website. Also, make sure to check if the video card supports the Plug&Play function.
How to fix LG Monitor when no image appears?
If no image appears on your LG Monitor, ensure the power cord is properly connected to the power outlet. Also, press the Power button to turn on the monitor. If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard. Verify that the PC is turned on. Check the signal cable between the PC and the monitor and reconnect it if necessary. If the signal from the PC is out of the display's frequency range, consult the 'Specifications' section of the manual and configure your display again.
General| Screen Size | 24 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Response Time | 5 ms |
| Refresh Rate | 60 Hz |
| VESA Mount Compatible | Yes |
| Contrast Ratio | 1000:1 |
| Connectivity | HDMI, DisplayPort, D-Sub |
| Speakers | Yes |
| VESA Mount | 100 x 100 mm |
| Color Gamut | sRGB 99% |
| Ports | HDMI, DisplayPort |
| Viewing Angle | 178° |
To Next Page
