To Next Page
M
Michael KrauseJul 30, 2025
Why is my LG 24MP88HM screen flickering?
- HhendersonbethJul 31, 2025
If your LG Monitor screen is flickering and the resolution is set to HDMI 1080i 60/50 Hz, change the resolution to the recommended setting of 1080P.
Why is my LG 24MP88HM screen flickering?
If your LG Monitor screen is flickering and the resolution is set to HDMI 1080i 60/50 Hz, change the resolution to the recommended setting of 1080P.
How to fix no image on LG 24MP88HM?
If no image appears on your LG Monitor, first ensure the power cord is properly connected to the power outlet and that the power button is pressed. If the monitor is in power saving mode, move the mouse or press any key on the keyboard. Also, verify that the PC is turned on. If the signal from the PC is out of range, consult the 'Specifications' section of this manual and reconfigure your display. Finally, the monitor might be in DPM mode if it has been on 'No-Signal' for 5 minutes.
Why is the screen color on my LG 24MP88HM mono or abnormal?
If the screen color on your LG Monitor appears mono or abnormal, check that the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, ensure the video card is correctly inserted in its slot. Finally, verify that the color setting is set higher than 24 bits (true color) in Control Panel settings.
What to do if display image is incorrect on LG Monitor?
If the display image on your LG Monitor is incorrect, use the Auto Configuration function and select 'Yes' to automatically adjust the image to the ideal setting. Alternatively, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution or fine-tune the display image. Ensure that the color setting is set higher than 24 bits (true color).
Why does my LG Monitor screen blink?
If your LG Monitor screen blinks, this is because the screen is set to interlace mode. Change it to the recommended resolution to resolve the blinking.
What to do if my LG 24MP88HM Monitor shows "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
If you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on your LG Monitor, install the display driver from the CD or diskette that came with your display. You can also download the driver from http://www.lg.com. Also, make sure to check if the video card supports Plug&Play function.
How to unlock OSD controls on LG Monitor?
To unlock the OSD controls on your LG Monitor, go to the OSD lock menu and change the settings to 'off'.
General| 3D | No |
|---|---|
| DDC/CI | Yes |
| Pixel pitch | 0.27 x 0.27 mm |
| Screen shape | Flat |
| Display diagonal | 23.8 \ |
| Display technology | - |
| Native aspect ratio | 16:9 |
| Contrast ratio (typical) | 1000:1 |
| Display brightness (typical) | 250 cd/m² |
| Product color | Silver, White |
| Number of OSD languages | 17 |
| Package depth | 380 mm |
| Package width | 610 mm |
| Package height | 125 mm |
| Package weight | 4700 g |
| Windows operating systems supported | Windows 10 Home x64 |
| Sustainability certificates | EPEAT Gold |
| Power consumption (standby) | - W |
Weight and Dimensions| Depth (without stand) | 186 mm |
|---|---|
| Width (without stand) | 541 mm |
| Height (without stand) | 414 mm |
| Weight (without stand) | 3200 g |
Lists all items included in the box for setup.
Describes the monitor's physical components and buttons.
Explains the functions and navigation of the joystick button.
Shows the different input ports available on the monitor.
Provides instructions on safely moving the monitor.
Step-by-step guide to attach the monitor stand base.
Steps to set up the monitor on a flat table surface.
Connect your computer to the monitor via D-SUB or HDMI.
How to access and navigate the main OSD menu.
Adjust core display and sound parameters via menus.
Troubleshooting steps for when the display shows no image.
Addresses incorrect position, bars, or noise.
