LG 24MP88HV - Driver and Plug&Play Issues; Screen Flickering

28
ENG
ENGLISH
TROUBLESHOOTING

Check
Control Panel ► Display ► Settings
andseeifthefrequencyortheresolutionwere
changed.Ifyes,readjustthevideocardtotherecommendresolution.

Iftherecommendedresolution(optimalresolution)isnotselected,lettersmaybeblurredandthe
screenmaybedimmed,truncatedorbiased.Makesuretoselecttherecommendresolution.

ThesettingmethodcandifferbycomputerandO/S(OperationSystem),andresolutionmentioned
abovemaynotbesupportedbythevideocardperformance.Inthiscase,pleaseasktothecomputer
orthevideocardmanufacturer.
CAUTION
The screen is flickering.
Didyouselecttherecommended
resolution?


IftheselectedresolutionisHDMI
1080i
60/50Hz,thescreenmay
beflickering.Changetheresolutiontotherecommendedresolution
1080P
.
Display image is incorrect
Thescreencolorismonoor
abnormal.


Checkifthesignalcableisproperlyconnectedanduseascrewdriver
tofastenifnecessary.


Makesurethevideocardisproperlyinsertedintheslot.


Setthecolorsettinghigherthan24bits(truecolor)at
Control Panel

►

Settings
.
Thescreenblinks.


Checkifthescreenissettointerlacemodeandifyes,changeittothe
recommendresolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Haveyouinstalledthedisplay
driver?


BesuretoinstallthedisplaydriverfromthedisplaydriverCD(or
diskette)thatcomeswithyourdisplay.Or,youcanalsodownloadthe
driverfromourwebsite:http://www.lg.com.


MakesuretocheckifthevideocardsupportsPlug&Playfunction.