To Next PageTo Next PageWhat to do if my LG 24ML44B Monitor shows 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message?
If your LG monitor displays an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message, first install the display driver from the LG website. Also, verify that your video card supports the Plug&Play function.
How to troubleshoot no image on LG 24ML44B Monitor?
If no image appears on your LG monitor, ensure the power cord is properly connected to the power outlet. If the signal from the PC (video card) is out of horizontal or vertical frequency range of the display, see the 'Specifications' section of this manual and configure your display again. Also, check the signal cable between the PC and the monitor to ensure it is properly connected, and verify the PC status.
Why is the display image incorrect on my LG monitor?
If the display image on your LG monitor is incorrect, check if the signal cable is properly connected and use a screwdriver to fasten it if necessary. Also, make sure the video card is properly inserted in the slot and the color setting is higher than 24 bits (true color) at Control Panel ? Settings. If the screen is set to interlace mode, change it to the recommended resolution.
How to unlock OSD controls on LG 24ML44B?
To unlock the OSD controls on your LG monitor, enter the OSD lock menu and change the items to 'off'.
Instructions for placing the monitor on a table with proper ventilation.
Instructions and precautions for mounting the monitor securely on a wall.
Details on connecting the monitor to a personal computer using various methods.
Instructions for connecting the monitor to a PC via digital HDMI for video and audio.
Selects predefined picture modes for optimal viewing based on content type.
Fine-tune image quality through brightness, contrast, sharpness, and Super Resolution.
Optimizes settings for gaming, including response time and visual aids.
Diagnose and resolve issues where the display shows no image or a 'NO SIGNAL' message.
Steps to resolve problems with accessing or controlling the On-Screen Display (OSD) menu.
Instructions for placing the monitor on a table with proper ventilation.
Instructions and precautions for mounting the monitor securely on a wall.
Details on connecting the monitor to a personal computer using various methods.
Instructions for connecting the monitor to a PC via digital HDMI for video and audio.
Selects predefined picture modes for optimal viewing based on content type.
Fine-tune image quality through brightness, contrast, sharpness, and Super Resolution.
Optimizes settings for gaming, including response time and visual aids.
Diagnose and resolve issues where the display shows no image or a 'NO SIGNAL' message.
Steps to resolve problems with accessing or controlling the On-Screen Display (OSD) menu.
General| Screen Size | 24 inches |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Panel Type | IPS |
| Refresh Rate | 60 Hz |
| Response Time | 5ms (GTG) |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Color Gamut | NTSC 72% |
| Viewing Angle | 178°/178° |
| Inputs | HDMI, VGA |
