What to do if my LG Monitor shows no image?
First, ensure the power cord is securely connected to the power outlet. If the signal from your PC's video card is outside the monitor's frequency range, consult the 'Specifications' section of the manual to reconfigure your display settings. Also, check the signal cable between your PC and the monitor to ensure it is properly connected.
What to do if the display image is incorrect on my LG 24MK600M Monitor?
First, check that the signal cable is properly connected, tightening it with a screwdriver if necessary. Ensure that the video card is correctly inserted in its slot. Then, navigate to Control Panel settings and set the color setting higher than 24 bits (true color). Finally, verify that the screen is not set to interlace mode; if it is, change it to the recommended resolution.
How to fix 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on LG Monitor?
Make sure to install the latest display driver from the LG website. Also, check that your video card supports the Plug&Play function.
How to unlock OSD controls on LG Monitor?
To unlock the OSD controls on your LG monitor, go to the OSD lock menu and change the settings to 'off'.
General| DDC/CI | Yes |
|---|---|
| Color gamut | 72 % |
| Pixel pitch | 0.27 x 0.27 mm |
| Screen shape | Flat |
| Display diagonal | 24 \ |
| Display technology | - |
| Native aspect ratio | 16:9 |
| Maximum refresh rate | 75 Hz |
| Supported video modes | 1080p |
| Display number of colors | 16.78 million colors |
| Display brightness (typical) | 250 cd/m² |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Product color | White |
| Market positioning | Home |
| HDMI version | 1.4 |
| Tilt angle range | -2 - 15 ° |
| Number of OSD languages | 18 |
| Panel mounting interface | 75 x 75 mm |
| On Screen Display (OSD) languages | CHI (SIMPL), CHI (TR), DEU, ENG, FIN, FRE, GRE, HIN, ITA, JPN, KOR, POL, POR, RUS, SWE, UKR |
| Package type | Box |
| Package depth | 139 mm |
| Package width | 611 mm |
| Package height | 391 mm |
| Package weight | 4300 g |
| AC input voltage | 100 - 240 V |
| Power supply type | External |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (standby) | - W |
Weight and Dimensions| Depth (with stand) | 182 mm |
|---|---|
| Height (with stand) | 415.3 mm |
| Weight (with stand) | 3100 g |
| Depth (without stand) | 66.5 mm |
| Width (without stand) | 539.1 mm |
| Height (without stand) | 321.5 mm |
| Weight (without stand) | 2800 g |
Guidance on setting up the monitor, including assembling the stand.
Instructions and precautions for mounting the monitor on a wall securely.
Instructions for connecting the monitor to a personal computer using D-SUB and HDMI cables.
Detailed technical specifications for the 22MK600M monitor model.
Technical specifications for the 24MK600M monitor model, including dimensions and weight.
Technical specifications for the 27MK600M and 27MK60TM monitor models.
To Next Page
