LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 6 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
1. Application range
This specification is applied to LCD TV used LL01A chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1)
Temperature : 25 ºC ± 5 ºC (77 ºF ± 9 ºF), CST : 40ºC ± 5 ºC
2) Relative Humidity : 65 ± 10 %
3) Power Voltage : Standard input voltage (100-240V~50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE / ICE specification
EMI: CE / ICE
4. Electrical Spec.
No. Item Specification Remark
1 Display Screen Device 22 inch wide color display module Resolution : HD 1366X768
2 Aspect Ratio 16:9
3 LCD Module 22 inch TFT WXGA LCD
4 Storage Environment Temp. : -20 deg ~ 60 deg
Humidity : 0 % ~ 85 %
5 Operating Environment Temp. : 0 deg ~ 40 deg
Humidity : 0 % ~ 85 %
6 Input Voltage AC 100-240 V~ 50 / 60 Hz
7 LCD Module(LGD) 502 X 297 X 14.5 HD
Edge LED
8 Pixel Pitch LGD 116.5 um x 349.5 um
To Next Page
Loading...
