LG 22LQ630H User Manual (English)

Other manuals for LG 22LQ630H

Quick Reference Guide24 pages

Brochure & Specs4 pages

Questions and Answers:

N
nsullivanAug 13, 2025
Why is there no picture on my LG 22LQ630H?
- M
  Mathew SawyerAug 13, 2025
  If your LG LCD TV shows no picture, several factors could be the cause. First, ensure the TV is turned on. Check that the antenna or cable is securely connected to the TV. Verify all connections on the TV are correct. If applicable, make sure the MPI cable is connected to the MPI device. The channel you are trying to watch might be encrypted, so try another channel. Finally, the tuning band may be incorrect, requiring adjustment in the Installer Menu settings.
K
Kristin WrightAug 17, 2025
Why is there no picture on my LG LED TV?
- S
  Shannon SmithAug 17, 2025
  If your LG LED TV shows no picture, several factors could be the cause. First, ensure the TV is turned ON. Check that the antenna or cable is securely connected to the TV. Verify all connections on the TV are correct. If applicable, connect the MPI cable to the MPI device. The channel might be encrypted, so try another channel. Finally, the tuning band could be incorrect; try adjusting the Installer Menu settings.
E
Eric MacdonaldAug 20, 2025
What to do if the LG 22LQ630H remote doesn’t work?
- G
  gilmorejosephAug 20, 2025
  If your LG LCD TV remote is not working, ensure the remote is in 'TV' mode using the MODE key. Point the remote directly at the TV's IR receiver. Make sure you are close enough to the IR sensor and that there are no obstructions in the path. Replace the batteries, ensuring correct polarity (+ and -) in the battery compartment. Dim the room light if it's too bright. If using an installer remote, confirm it is compatible with your TV, or if using a bed switch, ensure it is set to the correct bed.
S
Sharon GrayAug 25, 2025
What to do if my LG LED TV remote doesn't work?
- S
  silvaethanAug 25, 2025
  If your LG LED TV remote isn't working, first ensure the remote is in TV Mode by pressing the MODE key. Point the remote directly at the TV's IR receiver. Move closer to the TV or darken the room, as distance and light can interfere. Check and replace the batteries, ensuring correct polarity (+ and -). Remove any obstructions between the remote and the TV. If applicable, connect the MPI cable to the MPI device. The room might have too much light, so dim it. If it's the wrong installer remote, contact your LG dealer. Finally, adjust the Bed Switch or update the Installer Menu if the Bed Switch is set to the wrong bed.
K
kmataAug 28, 2025
What to do if my LG LED TV has normal picture but poor or no sound?
- J
  James WhiteAug 28, 2025
  If your LG LED TV has a normal picture but poor or no sound, the issue could stem from several sources. First, try a different channel to rule out a broadcast problem. Ensure the audio isn't muted by pressing the MUTE button or using the Volume Up key. Check that Installer Menu items 020 FEATURE LEVEL and 027 HOSPITAL MODE are set correctly. If applicable, select TV Speaker in the Audio Menu.
E
Evan JacksonAug 31, 2025
What to do if my LG 22LQ630H has normal picture but poor or no sound?
- W
  William ByrdSep 1, 2025
  If your LG LCD TV has a normal picture but poor or no sound, the issue could be due to a broadcast problem, so try a different channel. Check if the audio is muted and increase the volume. Also, verify that the Pillow/TV speaker is configured properly by checking Installer Menu items 020 FEATURE LEVEL and 027 HOSPITAL MODE. If applicable, select TV Speaker in the Audio Menu.
G
Gary SimmonsSep 4, 2025
What to do if I can't direct enter channel number on my LG 22LQ630H?
- M
  michaelallenSep 4, 2025
  If you cannot directly enter a channel number on your LG LCD TV, it could be due to the TV being in Pass-through Mode with Installer Menu item 028 CH. OVERIDE set to 0. To resolve this, set Installer Menu item 028 CH. OVERIDE to 1. Alternatively, if the TV is in FTG Mode, the channel entered may not be part of the FTG Channel Map; if necessary, make changes to the FTG Channel Map using the FTG File Manager or the FTG Configuration Application.
R
Richard ReynoldsSep 8, 2025
Why are there no channels present after setup on my LG LED TV?
- D
  Duane SmithSep 8, 2025
  If no channels are present after setting up your LG LED TV, it's likely that Auto Tuning (Channel Search) was not run. Refer to the Express Script or Custom Master TV Setup procedure, as appropriate. Auto Tuning must be run in order for the channel lineup to be populated. Note for Express Script: You must select “Execute Auto Search” in the Auto Search screen to run the search. To re-activate the Express Script, set Installer Menu item 117 FACT DEFAULT to 001.

LG 22LQ630H Specifications

General

Display diagonal	22 \
Display brightness	- cd/m²
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Edge-Lit LED
Supported video modes	1080p
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	20000:1
Screen format adjustments	4:3, 16:9
Viewing angle, horizontal	170 °
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	No
Cable lock slot type	Kensington
Tuner type	Analog & digital
Supported TV bands	DTV
Analog signal format system	NTSC
Digital signal format system	ATSC
Smart modes	Energy saving
Sound modes	Standard
Audio decoders	Dolby Digital
RMS rated power	5 W
Number of speakers	2
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Number of OSD languages	4
On Screen Display (OSD) languages	ENG, ESP, FRE, KOR
Audio formats supported	MP3
Image formats supported	JPG
Video formats supported	DIVX, MPEG4
Product color	Black
LED indicators	Power
Panel mounting interface	100 x 100 mm
AC input voltage	120 V
AC input frequency	50 - 60 Hz
Power consumption (max)	45 W
Power consumption (standby)	1 W
Power consumption (typical)	25 W
Package depth	140 mm
Package width	599 mm
Package height	414 mm
Package weight	6305 g
Certification	UL, cUL, NOM
Sustainability certificates	RoHS, ENERGY STAR