LG 22LS3500 - Installation and Assembly; Unpacking and Parts Identification

INSTA L LATION PROCEDURE/ ASSEMBLING AND PREPARING 9
INSTALLATION PROCEDURE
Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer
where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
& CAUTION - ------------- -- ---··------ -- - ----- ---· -· ··· ······· ·· ········· ·························· ·· ···--- -- - ·· ··· ········· ··· --- -- ---- ·-············· - ----- · ·· ···· ···· ·· ·· ·· ···-·· ·,
• Do not use any unapproved items
to ensure the safety and product life span.
• Any damages or injuries by using unapproved items
are not covered by the warranty.
•
In ca se of some mode l, the thin film on screen is a part of TV, So don't take it off .
• Power Cord Installation Guide
-If the
power cord provided with the TV looks like the below picture, please ensure that it is inserted
in the correct direction.
Power Cord Correct Wrong
~------------------------------------------------------ -- ---------------- ----- )
r QNoTE -- --- ----- --- -- ---------- -- ------- - ~
I • The items supplied with your product may vary depending on the mode l.
II • Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
i
• For an optimal connection, HDM I cables and USB devices should have be ze ls le ss than 10 mm (0 .39
inches) thick
and 18 mm (0. 7 in ches) width.
• Use
an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit
into your TV's
USB port
l_ _ _ _
* A< 10 mm (0.39 inches)
*B
< 18 mm (0 .7 inches)
I